1. Perform your repair.
  2. Once you are happy with it, remove any coarse scratches with 180 grit.
  3. Thoroughly degrease the area.
  4. Mask surrounding area.
  5. Treat bare metal areas with RAPTOR Etch Primer. Apply a High Build Automotive Primer if required.
  6. Once dried, unmask.
  7. Sand the repair area with 320 grit abrasive.
  8. Degrease with a solvent-based degreaser like Wipe#6 or System 20.
  9. Apply RAPTOR according to TDS.

Don’t miss out our TOP TIPS!